Maxx Genx Droid 7 Stock Firmware ROM (Official PAC Flash File) V12 (20130325)

About Maxx Genx Droid 7 Stock Firmware ROM

Maxx Genx Droid 7 Stock Firmware ROM is the official factory operating system package provided in .PAC format for the Maxx Genx Droid 7 device running on the Spreadtrum chipset. The official PAC firmware package (P3538_IMG_HVGA_MAXX_FM_DC_V12_20130325_1742.pac) enables a clean, full-system reinstallation using the SPD Upgrade Tool.

Unpack Password: linksave.net

Key Issues Resolved by Flashing

• Fix device stuck on boot logo (bootloop), continuous restarting, and failure to load Android.
• Unbrick soft-bricked devices caused by interrupted flashing, faulty root attempts, or broken mods.
• Eliminate persistent malware, adware popups, and force-close errors embedded in system partitions.
• Restore the smartphone completely back to original factory condition.

Firmware Specifications

• Target Device: Maxx Genx Droid 7
• Chipset: Spreadtrum (SPD)
• Firmware Format: .PAC file
• Flashing Tool: SPD Upgrade Tool
• Supported Host OS: Windows 11 / 10 / 8.1 / 8 / 7 / XP

Step-by-Step Flashing Instructions

1. Download the firmware package and extract it using password linksave.net.
2. Install the Spreadtrum USB Driver according to your Windows OS architecture.
3. Launch UpgradeDownload.exe as administrator.
4. Click the single gear icon (Load Packet) and select the .pac firmware file.
5. Click the Play button (Start Downloading).
6. Power off your Maxx Genx Droid 7 completely, hold the Volume Down key, and plug the device into your PC via USB cable.
7. Once the progress bar begins moving, release the volume button. Wait for the green Passed status. Disconnect USB and power on the phone.