Celkon Q54 Plus Stock Firmware ROM (Official Flash File) Celkon_Q54_Plus_V04_03-08-2015

About Celkon Q54 Plus Stock Firmware ROM

Celkon Q54 Plus Stock Firmware ROM is the official factory operating system package designed for the Celkon Q54 Plus mobile device powered by the Unknown Chipset chipset. This all-in-one archive enables clean OS reinstallation and device revival using Flash Tool.

Unpack Password: linksave.net

Key Issues Resolved by Flashing

• Fix device stuck on boot logo (bootloop), continuous restarting, and failure to boot into the operating system.
• Unbrick soft-bricked devices caused by interrupted firmware updates, improper root attempts, or corrupted modifications.
• Permanently eliminate stubborn malware, bloatware, and intrusive popup ads embedded in system partitions.
• Resolve persistent force-close errors, slow system response, and OS freezes.
• Restore the device completely back to pristine out-of-the-box factory configuration.

Firmware Specifications

• Target Device: Celkon Q54 Plus
• Chipset: Unknown Chipset
• Flashing Tool: Flash Tool
• Supported Host OS: Windows 11 / 10 / 8.1 / 8 / 7 / XP

Step-by-Step Flashing Instructions

1. Download the firmware package and extract it using password linksave.net.
2. Install the corresponding USB Flashing Drivers on your Windows PC.
3. Launch Flash Tool with administrative privileges.
4. Load the firmware package file into the tool interface.
5. Click the Download / Start button.
6. Power off your device completely, hold the Boot key (Volume Down or Volume Up), and connect it to PC via USB cable.
7. Wait until the tool completes the flashing process successfully. Disconnect USB and power on your device.