Unihertz Atom Stock Firmware ROM

About Unihertz Atom Stock Firmware

Unihertz Atom Firmware is the official factory stock firmware released by Unihertz for the rugged 2.45-inch ultra-compact 4G smartphone Unihertz Atom powered by the MediaTek MT6763 (Helio P23) processor.

This package contains complete factory partition images (including system.img, vendor.img, boot-verified.img, recovery-verified.img, tee-verified.img, and preloader) accompanied by the official partition map MT6763_Android_scatter.txt for effortless deployment via SP Flash Tool.

Key Features & Highlights

• Device Unbricking & Restoration: Restores devices experiencing bootloops, soft bricks, frozen boot screens, or corrupted system partitions back to pristine factory state.
• 100% Genuine Factory Software: Clean, unaltered original firmware guaranteeing flawless hardware operation (2.45-inch display scaling, fingerprint sensor, programmable shortcut key).
• Hardware Target: Built specifically for the g35v63c2k_dfl_P0 board hardware configuration.
• SP Flash Tool Compatibility: Includes official MT6763_Android_scatter.txt for precise block-level flashing.

Safety Precautions

Warning: Flashing stock firmware wipes internal storage and erases all personal user data. Always select Download Only in SP Flash Tool and never choose Format All + Download to prevent losing device IMEI numbers and NVRAM calibration data.

Flashing Guide via SP Flash Tool

1. Download the firmware archive from LinkSave.net and extract it on your computer.
2. Ensure MediaTek MTK VCOM USB drivers are properly installed on your Windows PC.
3. Open SP Flash Tool, click choose at Scatter-loading File, and select MT6763_Android_scatter.txt.
4. Verify that the download mode is set to Download Only, then click the green Download button.
5. Power off your Unihertz Atom completely, hold the Volume Down button, and plug in the USB cable to the PC.
6. Wait until the green checkmark circle (Download OK) appears. Unplug your device and power it back on.